Category: wolfBoot

wolfBoot support for the Xilinx UltraScale+ was added in 2020 and is a direct U-Boot replacement for improved security. wolfBoot provides enhanced features compared to U-Boot such as: Firmware integrity and signature verification on each boot Image integrity checking SHA2-256 or SHA3-384. Validation of the signature using ECC P256/P384, RSA (2048-bit or 3072-bit), ED25519 and […]

Read MoreMore Tag

We have added wolfBoot support for the new STM32C0. This is a low cost MCU similar to the STM32G0 based on a Cortex-M0 (48MHz). It is a very low cost general purpose 32-bit MCU with up to 32KB flash and 12KB RAM. Our wolfBoot secure bootloader is the only solution available for this platform thanks […]

Read MoreMore Tag

wolfBoot currently support both Renesas RA6M4 and RX72N MCUs. Supporting other Renesas MCUs for wolfBoot should not be difficult. We are considering the addition of Renesas RZ/N2L support for wolfBoot, which will build on our existing support at the wolfSSL and wolfCrypt level for Renesas RZ/N2L. The Renesas RZ/N2L uses a high-performance Arm Cortex-R52 core […]

Read MoreMore Tag

wolfBoot v2.0.0 introduced support for the Intel x86-64 bit architecture by leveraging the Intel Firmware Support Package (Intel FSP) and several new exciting and interesting features: TPM integration, Multiboot2/ELF support, PCI support, AHCI support, SATA security features, and others. On Intel x86_64, wolfBoot uses a dual stage design. In the first stage, It initializes the […]

Read MoreMore Tag